Established Flooring Contractor in Stockton CA - Tough Floors on Well-Prepped Concrete
Slabworks Concrete Coatings of Stockton installs garage floor coatings and epoxy floors for homes in Stockton and nearby cities like Lodi and Manteca. We also resurface older, worn slabs and seal concrete that gets oil and water tracked in.
We design and lay coated, polished and resurfaced concrete floors for Stockton homeowners, shops and small businesses, starting every job with the slab underneath.
Stockton is a big city with plenty of places people know by name, like the Haggin Museum in the middle of Victory Park and the Weber Point Events Center downtown, where the promenade looks out over the Delta. The city's place in Filipino American history is also why the Filipino American National Historical Society museum is here.
Around those places we see every kind of slab, from older garages with years of oil soaked in to newer floors that only need sealing, plus shops, kitchens and small businesses that need something tougher. We're based here, and whatever the building, we start from the concrete that's actually there.
- Licensed and insured.
- Free estimates at your property.
- Replies within 1 business day.
Why people around Stockton call usPrep first, floor second.
Tell us about your floor and set up a time for me to look at it.
Straight talk about your slab
I'll tell you plainly when a slab needs repair or a different fix, even if that makes the job smaller for us. You end up with a floor that suits the concrete you actually have.
Prep done, dust contained
Our crew grinds and repairs the slab before any coating goes on, since that's what holds it down. We close off the area and control dust so the rest of your place stays usable.
The owner on every job
You deal with me from the first visit to the final walk-through, and I check the crew's work along the way. You get a clear answer from the person responsible, not a list of maybes.
Concrete floors from a flooring contractor in Stockton, CA
Slabworks Concrete Coatings of Stockton is a flooring contractor in Stockton, CA, with 16 services built around concrete floors. Most calls start with a garage that's stained, dusty or cracked, or a shop floor that's wearing through, and end with a coated, polished or resurfaced floor that cleans up easily. The price moves with the size of the space, how much grinding and crack repair the slab needs, whether old coatings have to come off and which system you pick. The schedule turns on those same repairs, plus what a moisture check shows and how long the coating needs to cure. Your written estimate spells out what your slab needs.
Epoxy Floor Coatings
We roll epoxy over ground, repaired concrete to give garages, shops and kitchens a hard, sealed floor that wipes clean and stands up to daily traffic.
Commercial & Industrial Epoxy Floor Coatings
Running a warehouse, shop or commercial kitchen? We put down heavier epoxy systems for carts, forklifts and spills, and we close off the work area so the rest stays usable.
Garage Floor Coatings
Oil stains, cracks and a dusty slab are where most garage calls start. We grind, repair and coat the floor so it cleans up with a hose.
Polyaspartic Floor Coatings
What's polyaspartic? It's a fast-curing cousin of epoxy, and a common pick for garages and shops that people want back in use quickly.
Metallic Epoxy Flooring
We pour metallic epoxy for a swirled, glossy floor with real depth, a pick for showrooms, game rooms and living spaces where the floor is part of the look.
Urethane Cement Flooring
Commercial kitchens and food plants need a floor that takes hot water, grease and steam cleaning. Urethane cement handles that heat where standard epoxy can struggle.
Polished Concrete Flooring
We grind the slab you already have down in stages and polish it to a hard, low-upkeep shine, with no coating on top to peel.
Stained Concrete Flooring
Want color without a coating? We stain the concrete itself and seal it, so patios, basements and shop floors get a rich, mottled tone.
Terrazzo Flooring
We lay terrazzo, chips of stone or glass set in a binder and ground smooth, for lobbies, entryways and homes that want a floor meant to last.
Basement Flooring
Basement slabs often carry moisture up from below. We test for it first, then pick a coating or overlay that suits what the concrete is doing.
Concrete Grinding & Surface Preparation
Grinding decides whether a coating sticks. We open up the surface with diamond tooling and catch the dust, so the new floor has something to grip.
Concrete Sealing
We clean and seal driveways, patios and bare garage floors so oil, water and stains sit on the surface instead of soaking into the concrete.
Concrete Resurfacing & Overlays
Got a slab that's pitted, flaking or patched but still solid underneath? A thin overlay gives it a fresh, even surface without tearing it out.
Self-Leveling Concrete & Overlays
Dips and uneven spots cause trouble for tile, vinyl and coatings alike. We pour self-leveling concrete to bring the surface flat before the finish floor goes down.
Pool Deck Coatings & Resurfacing
We resurface tired pool decks and coat them with a textured finish that gives bare feet better grip and covers old stains and repaired cracks.
Concrete Floor Stripping & Removal
Peeling paint, failed epoxy or old glue has to come off before anything new goes down. We strip it back to clean concrete so the next floor bonds.
What happens after you callFrom slab to walk-through.
Call or send a request
Call (209) 420-1084 or send the form with a few lines about your floor. We get back to you within one business day to set up a visit.
I look at the slab
I come out, check the concrete for moisture, cracks and old coatings, and ask how you use the space. The estimate is free, and there's no obligation.
Plan and written estimate
You get a clear recommendation and a written quote. Before we start, we check with the office that covers your address and handle the permit application if one's needed.
Prep and install
Once you say go, we set a date and our crew grinds, repairs and coats the floor. I check the work along the way.
Final walk-through
I walk the finished floor with you and go over how to clean it and when it's ready for foot traffic and cars.
Coated and polished concrete floors
Concrete floor questions from StocktonStraight answers, no maybes.
How much does an epoxy garage floor cost in Stockton?
It depends mostly on the size of the garage and how much work the slab needs before any coating goes on. Cracks, oil soaked deep into the concrete and old paint that has to come off all add time. A flake or metallic finish also takes more material and labor than a plain color. I'll look at your slab and give you a written quote.
Why are some epoxy floor quotes so much cheaper than others?
The difference is usually prep. A low quote often skips grinding or crack repair and rolls coating over a smooth, dirty slab, and that's where peeling usually starts. We grind and repair first, and the estimate shows what's included so you can compare quotes fairly.
How long does it take to coat a garage floor?
It turns on how much repair the slab needs, what the moisture check shows and how long your coating takes to cure before you can walk or park on it. Polyaspartic cures faster than epoxy, which is one reason people pick it. Once you say go, we set a date that fits the work your slab needs.
Does a flooring contractor in California need a state license?
Yes, the Contractors State License Board requires a license when a job needs a building permit, uses any additional workers, or when labor and materials come to $1,000 or more. A bigger job can't be split into smaller ones to get under that amount. We're licensed and insured.
Do you have to grind concrete before putting down epoxy?
Yes, we grind the slab before we coat it, because epoxy needs an open, clean surface to grab onto. Grinding takes off the top layer, old sealers and stains, and it shows us the cracks we need to fill first. Skipping it is usually why a coating lifts.
Do you guarantee your epoxy floors?
Yes. Satisfaction guaranteed on every job, and you walk the finished floor with me before we call it done. That promise rests on the prep, which is why I'd rather spend the time grinding and repairing than rush the part you see.
Is polyaspartic or epoxy better for a garage floor in Stockton?
For most garages I lean toward a polyaspartic topcoat, because it cures faster and holds its color better than epoxy when sunlight hits it. Epoxy still makes a strong base coat and a good choice for shops and indoor floors. I'll recommend one after I see your slab.
How do I find out if my house in Stockton is in a flood zone?
For a property inside the City of Stockton, the city's Building Division handles flood zone determinations. The state also maps the land that may flood if a levee fails, but land outside those zones can still flood. It's worth asking before you put money into a ground-level garage or shop floor.
About Slabworks Concrete Coatings
Slabworks Concrete Coatings of Stockton is a concrete flooring contractor I started in Stockton in 2023, after years running a pressure washing business and then learning coating and prep alongside experienced installers. We're licensed and insured, and we offer 16 flooring services, with pages for 12 of the cities we serve. Most of our work is garage and epoxy floors for homeowners, along with shops, kitchens and small businesses. You can read more about how we got started.
Tell us about the floor you have in mind
We'll get back to you to set a time, then I come out, look at your slab and give you a written estimate. There's no obligation to go ahead.
- Phone
- (209) 420-1084
- Location
- Stockton, CA 95202
- Hours
- Mon–Fri: 6 AM–9 PM, Sat–Sun: 8 AM–10 PM
Where we work around Stockton
Slabworks Concrete Coatings of Stockton is based in Stockton, CA, and works in the cities around it, from Lodi to Manteca. The 12 cities below each have their own page, though they aren't the only places we go.