Flooring Contractor in Lodi, CA - Garage and Shop Floors Built on Solid Prep
Slabworks Concrete Coatings of Stockton is a flooring contractor serving Lodi, CA. We grind, repair and coat garage floors, shop floors and older slabs here, so the epoxy or polyaspartic finish has solid concrete under it.
Lodi floors we see, from older downtown slabs to newer garages
As a flooring contractor in Stockton, CA, we're a short drive from Lodi, and it sits between our home base in Stockton and Galt to the north. The floors we get called to here run from older houses near downtown to newer neighborhoods with attached two- and three-car garages. Around them are shops, small businesses and the ag and wine buildings that come with vineyard country, so a lot of Lodi calls are for floors that have to take tools, carts and a hose-down.
Older slabs here usually carry cracks, oil stains and a coat of old paint or sealer, and newer ones can hold moisture from the ground underneath. Either way, what's in the concrete decides the job more than the color you pick, so that's where I start.
Services in Lodi, CA
Garage Floor Coatings
Lodi garages take hot tires, oil and grit tracked in from the yard. We grind the slab, fill the cracks and lay a coating that cleans up with a mop.
Polyaspartic Floor Coatings
Garages left open to the afternoon sun need a topcoat that holds its color. Our polyaspartic floor coatings resist yellowing and cure fast.
Concrete Grinding & Surface Preparation
Older Lodi slabs often have patches, high spots and worn edges. We grind them down to open, sound concrete so whatever goes on top actually bonds.
Concrete Floor Stripping & Removal
Plenty of floors here already carry peeling paint or an old sealer. We strip it to bare concrete first, because new coating won't grip a failing one.
Commercial & Industrial Epoxy Floor Coatings
Shops, wineries and warehouses around Lodi need floors that stand up to spills, carts and wash-downs. We put down heavier epoxy systems built for that traffic.
Pool Deck Coatings & Resurfacing
Backyard pool decks here crack and wear through long summers. We repair the cracks and resurface the deck with a textured coating that gives better footing.
Working in Lodi: who signs off and what sets the price
Building work inside Lodi runs through the city's Building Division, which handles plan check and inspections. If your floor job needs a permit, that review comes before our start date, so it's part of the schedule from day one. Rules differ between the county and each city, so I don't guess. I check before we start. We're licensed and insured.
The price of a floor here turns on the slab more than the coating. How much grinding it takes, how many cracks need filling, whether old paint has to come off and whether moisture is coming up all move the number, along with the size and the system you choose. The schedule moves with the same things, plus any permit review. I'd rather spend the time on prep than rush to the part you see. You get a written estimate once I've seen your slab, the same way we work in Manteca and across the county.
What Lodi heat and older slabs do to a floor
Long, hot Valley summers are hard on garage floors here. A door left open in the afternoon puts direct sun on the slab, and tires rolling in off hot pavement can soften and lift a thin coat. For those garages I usually recommend a well-ground slab with a polyaspartic topcoat that stands up to sun and heat.
Older slabs near downtown have usually been patched, painted or sealed somewhere along the way. We test what's on them and strip or grind it off, because a coating is only as good as the concrete under it.
Get a free on-site floor estimate in Lodi
Send your request and we'll get back to you within one business day to set a time to see your Lodi slab. I come out, check for moisture and old coatings, and give you a written estimate. There's no obligation to go ahead.
How a floor job in Lodi goes after you call us
Call or send a request
Call (209) 420-1084 or use the form and tell us about the floor. We get back to you to set a time that works.
I look at your slab
I check the concrete for cracks, moisture and old coatings, and ask how you use the space. Clear the floor if you can, so I can see the whole slab.
You get a written estimate
I tell you straight what the slab needs and which system I'd use, and put it in writing. If the slab isn't ready or needs a different fix, I'll say so.
We check with the city
Before we start, we check with Lodi's Building Division for your address and tell you what we find. If a permit is needed, we take care of the application as part of the job.
Prep, install and final walk
Our crew grinds, repairs and coats the floor while I check the work along the way. When it's done, I walk the finished floor with you.
Lodi floor coating questions we hear
Which building codes apply to my flooring project in Lodi?
Lodi's Building Division enforces the 2025 California codes, including the Building and Residential Codes, for projects submitted on or after January 1, 2026. A project submitted before that date stays on the previous code cycle, so the submittal date decides which set applies. We confirm what applies to your address before we start.
How do I reach the Lodi Building Division?
Call the Building Division at 209-333-6714 or go to 221 W Pine Street in Lodi. It's open Monday through Thursday from 7:30 a.m. to 5:30 p.m. and Friday from 8 a.m. to 5 p.m., but city offices close every other Friday, so call before you drive over. If you hire us, we make that contact for you.
Who handles business licenses for work in Lodi?
For work inside Lodi, San Joaquin County sends businesses to the City of Lodi rather than licensing them itself. The county licenses businesses only in its unincorporated areas, and the county's licensing page lists a link to the City of Lodi business license.
How much does it cost to coat a garage floor in Lodi?
The cost of a garage floor in Lodi comes down to how much prep the slab needs, how big it is and which coating system you choose. Grinding off old paint, filling a lot of cracks or dealing with moisture adds the most, while a clean, sound slab keeps it lower. I look at the slab and give you a written quote at the estimate.
What causes epoxy on a garage floor to peel?
Most peeling starts with prep, when a coating goes over slick, oily or already-sealed concrete it can't grip. Hot tires then pull the weak spots up, which is why it usually lifts in the tire tracks first. We grind every slab to open the surface and strip old coatings before anything goes down.
How do I tell if my Lodi garage slab has a moisture problem?
Dark damp patches, a white powdery residue or old paint that bubbles up are the usual signs that moisture is coming up through the slab. I check for it at every estimate, because a coating laid over a wet slab can blister and let go. If it's there, I'll tell you and recommend a fix that suits it.
Call about your Lodi floor today
We answer evenings and weekends too, so call (209) 420-1084 after work or send the form whenever it suits you.